Stone Coated
Stone Coated Steel Roof
Mighty Dog Roofing provides the the best choice for roofer stone coated steel roofing located at Plano Texas. There is no one who does a better job than them when it comes to putting up the stone-coated steel Plano Texas roof. We’ve installed thousands of these roofs throughout the Plano as the most reliable roofing company in Plano and know how to make them last a lifetime. If you decide to go with this type of roof,we’ll install it using only the finest quality materials and craftsmanship unlike any other contractor in the area.
Stone Coated Steel Roofing
Why is a Stone Coated Steel Tile Roof the Best Roofing Choice For Your Home?
With all the different types of roofing materials available for homeowners is it any wonder that homeowners are investing between $20,000 and $60,000 in a roof? Asphalt shingle roofing is by far the most popular type of roofing material. Most people believe it’s the cheapest roof,well that’s because it’s the least expensive! Most home owners don’t realize that their money is being wasted when it is priced between $500 to $15,000 The roof is advertised as 30 years old, however it’s typically 10 to 15 years. If you are planning to stay in your home that many years,then you could need to repair your roof a second time. This will double the cost of your roof as well as raise inflation costs. You’ll be spending $15,000 to $20,000 on your roof AGAIN!
Why?
A warranty on asphalt shingles is something you might have seen. It usually will only cover the initial one year for replacement,and that’s just the shingle. It’s not transferable as well. You can’t transfer your investment in your roof to a future homeowner. It’s a complete cost-saving decision! It’s absurd to spend anything between $10,000 and $15,000 on roofing and not get any kind of protection. This is due to the fact homeowners can purchase shingles from Home Depot and then put them on their roof themselves. It is possible to be an occasional warrior and win the battle. The job he holds is an engineer in computers. He should therefore be able to install his own roof,right?
Wrong!
As they say your roof is your protection for all of the investment below,your house!
Stone Coated Steel Tile Roofing is the ideal option. This is a permanent roofing system that is not required to be replaced. This roof type has 50 years of lifetime,fully transferable warranty. You can pick from a range of colors,or you can even design your own colors. This roof is perfect for homeowners who are planning to make a major investment in their house and make it a gorgeous home. This roof is ideal for re-roofing because of its light weight. Most of the time,you will have say,a wooden shake roof and you’re planning to put on the tile. Well you have two choices. One is concrete,which is heavy tile,and the second is steel tiles that are light weight roofing? What do you think your house can support? It’s not difficult,is it? It’s a costly roof,yes but in the case of your home and budget,you have the option to choose in the event that you are in a situation where need to speak with an expert in steel tiles first regarding your roofing selections. They can put up any kind of roof you’d like. Make sure to contact them first. Contact me,I’ve been helping people with there roofing for 10yrs today. The last thing I would ever recommend is a subpar roof.
A Brief About Steel Roofing
Steel roofing is a type of roofing made of metal, similar to roofs made of zinc,aluminum,terna,etc. They are lighter and more easy to install than traditional roofing systems such as slate or terna. Steel,stainless steel galvalumine steel, galvanized zinc coated steel and various other premium grades of steel are used to make this type of roof material. These roofing sheets come in a variety of forms,such as box profile,cladding sheet as well as alloy sheets and stainless sheets. They also come in corrugated,single– or double-skin steel cladding,and sheets that are coated with substances like polyester. Certain roofing materials can be useful to cover walls of buildings such as warehouses,factories or any other commercial structures.
Stainless steel roofing is utilized extensively in commercial structures,as well as residential buildings. It can be used to create the modern shapes required by architectural designs that require more glass than traditional roofing. Stainless steel has better anti corrosive properties. However,they are more expensive than other roofing systems. Stainless steel alloy roofs are stronger,more durable less susceptible to corrosion and are more efficient thermally.
Steel Roofing Benefits
Steel roofing is an excellent way to keep your home safe. Steel roofing is easy-to-maintenance and is able to withstand harsh weather conditions without breaking or cracking. Steel roofing has many other advantages. Some of which are actually rather surprising to those who are hearing about this for the first time.
Steel roofing has interlocking panels that form a weather tight barrier for preventing cold and heat from entering and exiting.
A majority of companies offer a 50 year transferable warranty that covers hail and wind. It’s impact-resistant and can be walked on. They are also light. It is usually between 125 and 160 pounds per 100 square feet.
Steel roofing has a long lifespan. It is non porous and also freeze/thaw-resistant. It comes in three profiles Shake,shingle and tile. The aluminum zinc alloy coating protects it from rust. You can also get it with three-millimeter ceramic stone granules that are then sealed with polymer coating. Steel will stop your home from setting itself ablaze. Steel will prevent the roof from the ability to burn and prevent lightning from catching the home on fire too. It is very sturdy material and you may be able to stand and even jump on it. It is so strong that it’s even resistant to extreme weather conditions.
Your home will be safe from weather and fire. Additionally,you will get better insulation as well as a higher resale value. Dual pane windows can be installed on your entire roof for greater insulation for your home. It is eco-friendly and is made from other recyclables.
There are numerous choices for tiles available in a variety of designs and colors,so you can choose the decor and design you’re looking for. They understand how important it is to have each part of your home styled and properly matched. At a fraction of the price of a higher-priced option,you can have an elegant appearance without investing much. This type of roofing can last three times as long as any other type of roof. This is something you should be aware of when looking at the amount of amount of time and effort needed to keep your home in good condition.
Stone Coated Steel Roofing – Did You Know it Has Been Around For Over 50 Years?
Stone Coated Steel Roofing Systems by DECRA(r). Imagine the look and architectural appeal of a shake or tile roof over your home but with the durability of a the fire-rated Class A and a Class 4 resistance to impact against Hail. The roof will be safe from wind speeds up 120 mph,as well as a transferable warranty of 50 years.
Contact me if you are interested. Stone Coated Steel Roofing is an idea that has been in use for many decades. The initial Decra system’s inventor actually saw it in action during the trip to Europe following World War II. It has evolved through the years to become a durable and beautiful finished product.
DECRA(r),today’s products,are manufactured using an alloy of aluminum and zinc that is coated,but strong steel. This is then coated with 3M ceramic stones granules,and then sealed with an exclusive polymer coating.
There are a variety of styles and colors to choose from for the DECRA(r) roofing system. Let’s begin with the Italian elegant style of DECRA(r),VILLA TILE. Villa Tile will give you the architectural details of an Italian tile roof with the durability and superior performance of steel. You might prefer the DECRA(r) TILE. The DECRA(r) TILE is more Mediterranean in style and includes all the great features.
You can pick between DECRA (r) SHINGLE or DECRA (r)SHINGLE PLUS if you like an architectural style. Shake offers the appearance of a cedar roofing with a long profile,but without the fade. Decra Shingle is the most cost-effective system offered giving you the look that will match the finest architectural shingle. Shingle Plus offers an even more luxurious shingle appearance for only a fraction of the weight of asphalt shingles.
Stone Coated Steel Roof FAQs
What is the stone coated steel roofing product made of?
-
- 26 gauge,pre-primed,galvanized steel
-
- Coated by poured on acrylic basecoat
-
- Embedded with ceramic earth-stone granules
-
- Over-coated with a clear acrylic glaze and baked on
How heavy is stone coated steel roof?
Stone coated steel roofs weigh only about 1.5 lbs per square foot,which is seven times lighter than most clay or concrete tiles which weigh 6 to15 lbs per square foot. Stone coated metal roofs are even lighter than inexpensive asphalt composition shingles,and they are far more durable than any asphalt shingles.
How noisy is a stone coated steel roof?
Due to the interlocking design,insulated dead-air space between the roofing layers,and the earth-stone granule finish,these roofs are very quiet. A stone coated metal roof is often much quieter than an asphalt shingle roof.
What is the lifespan of stone coated steel?
The lifespan is 50+ years which is 2-3 times longer than most traditional asphalt shingles.
Will heat and cold make a stone coated steel roof contract and expand?
There is minimal movement with steel roofs due to the fully interlocking profile when affixed to the batten. Also,the rough granule finish and angular design add to restricting movement.
Slate Roof Installation
,
Mighty Dog Roofing provides the the best choice for roofer slate roof installers located at Plano Texas. Our Plano slate roof installers are among the top across the region. This makes them among the most reputable roof contractors in Plano. Since 1960, we have installed slate roofs. Because we know how vital these elements are, we will not make a mistake. You can count on us to offer a high-quality product and service.
,
,
Slate Roof Installation With Hip and Ridge Joints
,
Slate roofs are preferred by many as they are among the best types of roofs. Though the installation cost quite a bit of money,slate roofs are great in improving the general appeal of the housing. Usually,homes with this type of roof installation have higher values.
,
Slate roof installation involves setting the hip and ridge joints. Before slating the roof,furring strips along the hip need to be installed. The standard thickness of slates is 3/16″ to 1/4 “. For slates with this thickness,3/4″ furring strips are recommended. Nail these furring strips to the roof using 2.5″ hot dipped galvanized common nails.
,
On the bottom of the furring strips,install the first piece of the copper flashing using 1.5 copper roofing nail. To hide the furring strips,fold the bottom of the flashing.
,
Slate roof installation follows after the copper flashing has been nailed and folded. Install the slates over the flashing by nailing them into the furring strips. 1.5 copper roofing nails can be used but certain areas need to be attached with 2.5 copper roofing nails.
,
Install the next piece of step flashing over the hip slates. For this,a single nail will do. After this,nail the next pair of hip slates over it with at least two nails per slate. Fold the flashing lengthwise in half with 4″ in each side. With this,the overlying slates and flashings,the 16″ hip slates are to be overlapped halfway. Meanwhile,the step flashings would be overlapping each other by 2″.
,
Continue the setting up in this manner,flashing over the top of each pair of hip slates. The hip slates can be installed even without cutting and they do not to be tapered as well. To finish quickly,install the slates in pairs,not one side at a time.
,
,
Slate Roofing Made Easy – Choosing The Right Tools And Materials
,
If you are planning to put up your own slate roof it is strongly recommended that you do some research in advance. Preparation is the key to success,so prior to you start make sure you are aware of slate types,their manufacturing methods flashing,sheathing nailing,and other materials as well as slate roofing equipment.
,
Before you put up a slate roof,make sure your roofing is in good shape. Slate roofs shouldn’t be installed at a lower slope than 4:12. This is at a minimum of 12 feet of elevation over 12 feet of running. If your roof is meeting these requirements,you should think about purchasing the right tools for cutting as well as the materials needed to complete the job.
,
Tools
,
You must ensure that you have the right slating tools,and that they are used. A slate hammer, a slate cutter,and a slate-ripper should be in your toolkit. Use a slate cutter, not a diamond saw when cutting slates. The latter will produce an edge with a bevel of the slate,which is in line with the appearance of other slates. A diamond blade will produce the appearance of a square edge. out of place.
,
Slates
,
There are many slates available however not all slates are alike. You need to choose the best slates for your roof. Think about the quality and thickness,size and type of slates you are considering when choosing the right one. For example,thick slates are more difficult to cut. Likewise, smaller slates can take longer to set up because there are fewer of them.
,
Check that the slates are fitted with nail holes in the right place. It is important to position the holes to allow the nails to be driven just above the head on the slate beneath. Do not make holes that are too deep as it could harm the underlying slate.
,
Make sure you order the correct amount of slates. It is essential to estimate your head lap prior to time and purchase enough slates to meet it. It is best to order starter course slates in separate orders. The slates for the starter course should have the nail holes on only the front and the top.
,
Materials
,
Slate Nails
,
Use high-quality nails. Slate nails should be stainless steel or aluminum. In coastal areas,copper nails are preferred,and in extremely harsh conditions silicon-bronze nails are best.
,
The proper length of nail is important. The nails should only penetrate the decking boards of your roof when installing them. This is crucial because too long nails can cause damage to the boards and cause them to break or splinter the wood that lies behind. This can reduce the boards’ thickness and also the strength of the nails.
,
Decking materials
,
The decking materials beneath the slate should last at least as long as the slates themselves,which is why you must select materials that are durable enough. This requirement is met by battens and wood boards that have an average thickness of 20-40mm. They are able to be rough-sawn or designed or even feature the tongue-in-groove style. Concrete that can be nailed or gypsum are other sturdy decking materials. Avoid plywood and laminated wood.
,
Underlay
,
Slate roofs do not really require underlay. Underlay essentially just has to keep water out until the slate tiles and flashings are installed. It also acts as a substrate to draw chalk lines. A single layer of 30lb felt will suffice in the majority of cases.
,
Flashing material
,
Use a high-quality flashing material. Copper stainless steel, sheet lead are all appropriate. The material you use will be more heavy on valleys and gutters,but lighter on chimney flashings or ridges.
,
,
,
Slate Roofing For Your House
,
,
Before you begin to build a slate roof by yourself There are a few points to be aware of. Here we will discuss the numerous issues associated with slate roofing. The first thing to do is ensure that your roof slopes higher than 4:2. The slope should increase by 4 feet for each 12 feet.
,
Materials for Roofing
,
The standard tools for slate roofing includes a slate ripper,cutter and the slate hammer. Do not use diamond saws to cut slates with a square edge. Instead, use the slate cutter for a neat appearance.
,
Slate Type
,
As with all construction materials,slates come in various varieties. Slates are available in a range of material and quality,as well as their dimensions and thickness. Whatever slate you eventually select,will affect how you will work to build your roof. You need to ensure that the slates have enough room to allow the nail to travel through the top of the slate. This will prevent any leakage.
,
Once you have chosen the type of slate that is going for your roof, you must purchase the appropriate amount of slates. You might find that the slates you purchased are not available anymore and you need to go back to the retailer. You may need to purchase additional slates in the event that some plates become damaged in the course of roof construction. You can purchase the starter slates separately.
,
Other Materials
,
A lot of nails will be needed to install slate roofing. Choose stainless steel or aluminum nails to avoid rusting. Copper nails are best for those who live in extreme weather areas. The length of nails is vitally important in slate roofing since the nails must be deep enough into the roof deck. Any further will result in destruction to the wooden boards.
,
In addition to nails, you will use decking materials in addition. Because they are beneath the slates,they should match the length of the slates you purchased. Avoid laminated wood and plywood decks. If you wish to add an underlay to hold water until the slates are installed.
,
,
Slate Roof Repairs – The 100 Year Roof!
,